client case

Dassault Falcon 2000

A New Aircraft in the Hangar, a Familiar Team Behind the Cabin

use case

Private operations

sales lead

AeroVisto

interior design

AeroVisto

cooperation

FLYINGGROUP

9528_CC_falcon-2000_2611

A Harmony of Materials

Some client relationships outlast an aircraft. This owner had flown a Cessna Citation Sovereign with an AeroVisto cabin for some five years when he moved up to a Dassault Falcon 2000LXS. He compared several proposals for the new cabin, and the decision came down to what the earlier project had shown: a complete concept and a team he already knew.

The brief was a cabin both classic and modern — light, but not all beige. AeroVisto brought its full sample collection to the client’s premises, where the complete interior came together in a single session of two to three hours. A rendering then showed the finished Falcon cabin in its chosen materials, so the client could approve the result before any work began.

The palette that emerged is calm and precise. Off-white leather on the seats and white linings around the windows and overhead keep the cabin bright, with a light gray carpet underfoot. Against this light base, a dark wood grain frames side ledges, bulkheads, and tables, warmed by the brass tone of the fittings.

The defining choice of this Falcon cabin sits on every passenger seat. The client wanted two materials, and AeroVisto combined them on each seat. Off-white leather covers the cushions where passengers sit and lean, while a textured granite-gray fabric dresses the seat backs and the outer sides of the armrests. Each fabric panel is framed in leather, so the seat keeps one clean outline from every angle.

The same fabric returns on the dado panels below the windows, tying seats and linings into one design. The stitching follows the original seat design, with double seams along the cushion edges and a thread matched to both leather and fabric.

The windows received particular attention. AeroVisto reupholstered the window liners in white Ultraleather® and replaced the pleated shades and lenses at every window — the details passengers notice on every flight. The same white material covers the headliner, the passenger service units, and the frame of the medical cabinet, which keeps the upper cabin bright and calm.

9534_CC_falcon-2000_2611
9558_CC_falcon-2000_2611

Dark Wood, Front to Rear

Every wooden element in the Falcon carries Decor Film Application in a dark wood grain with a matte finish. It covers side ledges, bulkheads, and cabinets, as well as the inlays of the pull-out and conference tables. The work starts with the wood itself: AeroVisto prepares each substrate, then works the film like a veneer, with the grain running in one direction across adjoining parts.

Around the wood, the monuments were brought back to form. AeroVisto repaired the galley and cabinets and refreshed both lavatories with new countertops in a light mineral surface, new mirrors, and repainted surroundings. The tambour doors, re-covered in Alcantara®, set a soft counterpoint to the dark grain.

The cockpit and baggage compartment follow the same care. Both crew seats were reupholstered in leather with light sheepskin covers, and new curtains close off the cockpit and forward wardrobe. In the baggage compartment, new grospoint covers the panels and doors.

Partnership in Paris

The Falcon itself stayed in Paris with FLYINGGROUP, the owner’s operator and maintenance organization — a new partner for AeroVisto. The client decided shortly before the work had to begin, so the two teams had little lead time to find a common rhythm.

AeroVisto set up the collaboration with a joint project kickoff that defined roles and interfaces from the outset. A project team then traveled to Paris with AeroVisto’s own transport boxes, accompanied the removal of the interior together with FLYINGGROUP, and packed every element on site. The interior moved to the AeroVisto Interior Shops in Staad and returned to Paris for installation by FLYINGGROUP, with AeroVisto’s support.

A short lead time calls for flexibility on both sides, and a new partnership calls for clear communication. AeroVisto planned the work around the owner’s schedule, and the project stayed on plan through to delivery.

9453_CC_falcon-2000_2611
9627_CC_falcon-2000_2611

A Falcon in Its Owner's Colors

Inside, the Falcon 2000LXS now carries the cabin its owner chose at his own table. It is light, classic, and modern at once, framed by dark wood grain, with two materials on every seat.

For AeroVisto, the project adds another Dassault aircraft to its growing work on the Falcon family. It also shows the approach the AeroVisto team brings to every refurbishment — a design developed with the client, carried out together with the partners the client already trusts.

Scope of work

virtual tour

more client cases

Falcon 7X – Project Review

Luminair’s cabins share a signature: one dark wood grain in Decor Film Application, a design line the Hamburg operator developed with AeroVisto some two years ago and has since taken through three projects.

Read more »

Client Case: Embraer Phenom 300

This Embraer Phenom 300 design features three signatures. Leather with Stay-Clean-Technology covers the cabin seating, chosen to maintain its appearance under frequent passenger use. The wooden elements carry Decor Film Application, robust where daily service demands it.

Read more »

Client Case: Embraer Legacy 500

The Embraer Legacy 500 belongs to the current generation of business-jet cabins — interiors with more complex geometries, more individual components, and more of the cabin lined and trimmed than earlier designs.

Read more »
Embraer Phenom 300, AeroVisto, Aircraft Refurbishment

Client Case: Embraer Phenom 300

The owner of this Phenom 300 approached us with a decision that turned a maintenance event into something larger: use the downtime for a complete refurbishment — maintenance, cabin, and exterior, all at once.

Read more »